Starter Motor 12 Volt Manual Gearbox: Beetle (1967-1979), T2 Bay (1968-1975), T2 Split Bus (1967)
SKU
311-911-023/DX/
Starter Motor 12 Volt Manual Gearbox: Beetle (1967-1979), T2 Bay (1968-1975), T2 Split Bus (1967)
SKU
311-911-023/DX/
Reviews & Ratings
Standard 12 volt starter motor.
Brand new unit, no exchange necessary.
£109.96 £91.63
Klarna now available in checkout
Product Information
Also known as | 311911023DX |
---|---|
Fitting Info | Does not include starter bush. A new armature bush (113-301-155) must be used when replacing your starter motor. We recommend fitting starter motor bolt 111-199-101/B, Due to the smaller diameter body of modern starter motors, original D-head bolts may not be suitable. Please also check the condition of your wiring - most reported faults in new starter operation are due to old wiring from the ignition switch producing low voltage at the starter motor solenoid. |
Marque | Volkswagen |
Vehicle | Beetle, T2 Split, T2 Bay, Karmann Ghia, Beetle Cabriolet, Type 3, Buggy/Baja, Brazil Kombi |
Weight (kg) | 3.05 |
Brand | FORST |
Quality | Good Quality |
Unit of sale | Each |
Standard or Upgrade | Standard |
Fits Vehicles
Beetle | 1967-1979 |
---|---|
T2 Bay | 1968-1975 |
T2 Split Bus | 1967 |
Karmann Ghia | 1967-1974 |
Beetle Cabrio | 1967-1979 |
Type 3 | 1967-1973 |
Buggy/Baja | 1967-1979 |
Brazil Kombi | 1997-2014 |
Product Questions
1) Will this starter fit a VW Beetle 1969 1500 engine.
2) How many Kw is this starter is it above 0.80 Kw standard
3) When are stocks expected
2) How many Kw is this starter is it above 0.80 Kw standard
3) When are stocks expected
Question by: Fernando Prazeres on 11 Sept 2021, 11:40
If your beetle has a12volt flywheel then this starter will be correct.
You will also need to replace the starter bush part code 113-301-155
we should be getting new stock the end of the month.
Starter will have a standard output around 0.75-0.8KW - It is not uprated.
You will also need to replace the starter bush part code 113-301-155
we should be getting new stock the end of the month.
Starter will have a standard output around 0.75-0.8KW - It is not uprated.
Answer by: Max Ayling on 15 Sept 2021, 12:46
Does this starter work with the original bolt or does it need the new version (currently out of stock)?
Thanks
Thanks
Question by: Richard Clarke on 6 Mar 2024, 12:23
It will work with the old bolt but we do have a bolt under a different brand on the shelf
111-199-101
111-199-101
Answer by: Rob Baxter (Admin) on 6 Mar 2024, 13:04