

This gas pedal linkage upgrade kit from Buttys Bits for VW Splitscreen 60-67 left hand drive converts your throttle pedal from a worn vague on/off switch to a smooth progressive control and transforms the driveability of your bus.
This is a must have upgrade for your Splitscreen replacing the tired, worn and rusted original linkage system with a more positive feeling pedal linkage.
This product, and the activities for which this product is intended (including operation, servicing and maintenance of a passenger vehicle or off-road vehicle) can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov
This product is intended for use as originally designed and should not be modified for alternative purposes. Please ensure it is installed by a qualified professional. Fitting instructions are typically not included with the product. Contacts
Also known as | AC721002 |
---|---|
Fitting Info | The kit consists of: A laser cut 5mm steel replacement pivoting linkage complete with sealed ball bearing swivel section Upgraded linkage from the pedal with bolted rose joints Rose jointed link rod return spring & mounting hardware When bolting the end of your throttle cable to the linkage, tighten then undo by a half turn to allow the cable to rotate freely. Use the supplied return spring if the kit is being used with a standard carburetor. Twin carburetors will have their own return springs which are stronger than stock springs. |
Marque | Volkswagen |
Vehicle | Split Bus |
Brand | Buttys Bits |
Quality | Top Quality |
Unit of sale | Kit |
Standard or Upgrade | Upgrade |
Weight | 1.00 |
Split Bus | 1959-1967 |
---|