SIGN UP TO OUR NEWSLETTER

+1 (833) 595-9193

Wheel Stud M14x1.5 45mm Press In: T2 Bus (1970-1979), Vanagon (1980-1991)

SKU
AC601SS45

Wheel Stud M14x1.5 45mm Press In: T2 Bus (1970-1979), Vanagon (1980-1991)

SKU
AC601SS45
Reviews & Ratings
Press in wheel stud. Supplied individually.

The total length of the stud is 53mm. The splined section is 15mm, then 30mm of thread and 8mm blank at the outer end.

Designed to be pressed into hubs with factory installed studs, to allow aftermarket alloy wheels and/or spacers to be safely fitted where the original studs would be too short.

It is important to measure and check the length of studs you'll need. Once installed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.
$3.95 $3.95

Need help?

Contact us


Klarna now available in checkout


In Stock
EMPI

Warning

This product, and the activities for which this product is intended (including operation, servicing and maintenance of a passenger vehicle or off-road vehicle) can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov

Product Information

Product Attributes
Also known asAC601SS45
Fitting Info

The total length of the stud is 53mm.

The splined section is 15mm

30mm of thread and 8mm blank at the outer end.

MarqueVolkswagen
VehicleBay Bus, Vanagon
Thread Diameter14
Thread Pitch1.5
Thread Length45
BrandEmpi
QualityGood Quality
Unit of saleEach
Standard or UpgradeUpgrade
Supplier code70-2810-0
Front or RearFront, Rear
Weight1.00

Fits Vehicles

Product Vehicle Years
T2 Bus1970-1979
Vanagon1980-1991

Product Questions

No questions yet. Be the first to ask the question!

You may also like