Screw-in M14x1.5 stud, 80mm overall length for aftermarket wheels and spacers.
Designed to screw into hubs that originally would have used wheel bolts in order to convert to a stud & nut setup. This makes it easier to locate your wheels on the hub, and allows a consistent choice of nuts to be used front and back. Perfect for use with alloy wheels and/or spacers.
It is important to measure and check the length of studs you'll need. Once screwed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.
This product, and the activities for which this product is intended (including operation, servicing and maintenance of a passenger vehicle or off-road vehicle) can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov
This product is intended for use as originally designed and should not be modified for alternative purposes. Please ensure it is installed by a qualified professional. Fitting instructions are typically not included with the product. Contacts