Locking lug nug Kit: Vanagon (1980-1991)
SKU
AC601LBT25
Locking lug nug Kit: Vanagon (1980-1991)
SKU
AC601LBT25
Reviews & Ratings
Locking Wheel Stud & Nut set for Vanagon models with studs on the rear.
This set includes a set of 4 locking wheel nuts M14x1.5 with Taper seat, and 2 wheel studs to mount to the front hubs.
Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.
Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.
This set includes a set of 4 locking wheel nuts M14x1.5 with Taper seat, and 2 wheel studs to mount to the front hubs.
Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.
Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.
$45.95 $45.95
Klarna now available in checkout
Warning
This product, and the activities for which this product is intended (including operation, servicing and maintenance of a passenger vehicle or off-road vehicle) can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov
Product Information
Also known as | AC601LBT25 |
---|---|
Fitting Info | For wheels with 60degree tapered seat Not suited for BRM wheels |
Marque | Volkswagen |
Vehicle | Vanagon |
Thread Diameter | 14 |
Thread Pitch | 1.5 |
Brand | Heritage Kits |
Quality | Good Quality |
Unit of sale | Kit |
Standard or Upgrade | Upgrade |
Front or Rear | Front, Rear |
Weight | 1.00 |
Fits Vehicles
Vanagon | 1980-1991 |
---|