Wheel Stud M14x1.5 60mm Press In: T2 Bus (1970-1979), Vanagon (1980-1991)
SKU
AC601SS43
Wheel Stud M14x1.5 60mm Press In: T2 Bus (1970-1979), Vanagon (1980-1991)
SKU
AC601SS43
Reviews & Ratings
Press-in M14x1.5 stud, 60mm overall length for aftermarket wheels and/or spacers.
Designed to be pressed into hubs with factory installed studs, to allow aftermarket alloy wheels and/or spacers to be safely fitted where the original studs would be too short.
It is important to measure and check the length of studs you'll need. Once installed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.
Designed to be pressed into hubs with factory installed studs, to allow aftermarket alloy wheels and/or spacers to be safely fitted where the original studs would be too short.
It is important to measure and check the length of studs you'll need. Once installed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.
$5.95 $5.95
Klarna now available in checkout
Warning
This product, and the activities for which this product is intended (including operation, servicing and maintenance of a passenger vehicle or off-road vehicle) can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov
Product Information
Also known as | AC601SS43 |
---|---|
Marque | Volkswagen |
Vehicle | Bay Bus, Vanagon |
Thread Diameter | 14 |
Thread Pitch | 1.5 |
Thread Length | 60 |
Brand | Heritage Parts Centre |
Quality | Good Quality |
Unit of sale | Each |
Standard or Upgrade | Upgrade |
Front or Rear | Front, Rear |
Weight | 1.00 |
Fits Vehicles
T2 Bus | 1970-1979 |
---|---|
Vanagon | 1980-1991 |