Oversized Ball Joint for Front Torsion Arm: T2 Bus (1968-1979)
Oversized Ball Joint for Front Torsion Arm: T2 Bus (1968-1979)
Reviews & Ratings
Oversized ball joint for front torsion arm.
Ball joints are an important component of any vehicle’s suspension, when they begin to have problems or fail, the overall handling and ride characteristics of the vehicle are likely to become compromised. For this reason, if you suspect that your vehicle’s ball joints have become severely worn, replace them with these top quality replacements.
Klarna now available in checkout
Warning
This product, and the activities for which this product is intended (including operation, servicing and maintenance of a passenger vehicle or off-road vehicle) can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov
Product Information
Also known as | 211405373 |
---|---|
Fitting Info | This HD ball joint should be used if your torsion arm bore diameter is too large to use the standard version - 211-405-371\/A The outer diameter of this ball joint (at the knurl section) is 48.6mm. There should be a minimum overlap\/interference of 0.2mm between the joint and the torsion arm bore.'' |
Marque | Volkswagen |
Vehicle | Bay Bus |
Brand | Meyle HD |
Quality | Top Quality |
Front or Rear | Front |
Left or Right | Left, Right |
Unit of sale | Each |
Standard or Upgrade | Standard |
Supplier code | 116 010 0657/HD |
Weight | 1.00 |
Fits Vehicles
T2 Bus | 1968-1979 |
---|