For use on;

Valve cover, oil pan, water and oil pump, differential housing, transmission, gear oil sump, thermostat housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment.

1. Remove sealant residues and clean the sealing surfaces with solvent.

2. Sealing surfaces must be clean, dry, and free of oil or grease before applying the sealing compound in order to ensure reliable sealing and adhesion.

3. Processing temperature (ambient / adhesion surface temperature): +5 to +35°C.

4. Apply the sealing compound evenly across the entire surface.

5.  Immediately remove any excess sealing compound applied, as there is a risk that it could drip into the interior.

6. Depending on the application, the parts can be fitted immediately after application, after skin formation or after complete curing.

7. Fit the components in line with the manufacturer’s specifications.

8. The sealing function is immediate.

9. After use, reseal the sealing compound securely.

10. Safety and technical data sheet at www.elring.com.