VW Type 3 Exhaust

Buy your VW Type 3 exhaust components here!

Heritage Parts Centre is the one-stop-shop for VW Variants exhausts, whether you're looking for a complete new system or just a replacement tailpipe. Perhaps you'd like to upgrade from your standard Type 3 Fastback exhaust to one of the many aftermarket options we offer? Whatever your needs - you're in the right place...

Original Style Notchback Exhausts

The standard Type 3 exhaust system is relatively simple. It consists of a manifold (the pipes that connect the silencer to the engine), the silencer itself, and the tailpipes. However, the exact design of the silencer and manifold changed slightly over the years, so it is important to check which type of VW exhaust system your car requires... FIRSTLY, check your engine size and whether it is single port or twin port version.

If you are unsure which engine size you have, you should check the code on your engine crankcase and consult the chart below:

IMPORTANT: Please check your engine code before ordering, many Type 3s do not have their original engines, so using your car's production year or log book as a guide is not advisable.

Aftermarket Exhaust Information

There are two main types of Aftermarket VW Type 3 Exhaust Silencer. We stock a huge range to choose from, if in doubt please call!

Type 3 Glass Pack Silencers

A high flow silencer, composed of a heavy gauge steel casing containing a perforated central steel core tightly wrapped in high density fibre glass. This creates virtually no back pressure, therefore you lose less power but they are very noisy.

Quiet Pack

An oval shaped silencer containing perforated tubes. Quiet packs offer very good sound absorption with low back pressure. A Turbo/Mondo muffler is a larger version of a Quiet pack.

The black paint finish on exhaust is designed only to protect the exhaust during transportation to the customer. This is not high temperature paint. Due to the extreme conditions exhaust parts operate under, we are unable to guarantee the finish of chrome plated parts.

Metallic Ceramic Coating has recently been introduced and is a space age, high gloss silver finish that offers high impact protection. It is heat fused at 650 degrees F creating a virtually impenetrable barrier against external corrosion and damage. This coating also lowers the temperature of components, which in turn increases power.

Please Note:

All exhausts are supplied with fibre gaskets. It is worthwhile purchasing a pair of tailpipe fitting kits (£2.95 each - 111-298-051) when you buy any exhaust/header as these contain the clamps and hardware to complete the job. If you are using your heat exchangers and replacing a standard silencer with an aftermarket exhaust, please ask your sales person for advice on re-connecting the air pipes.

Headers are 4 into 1 manifolds which offer a power increase when compared to standard or all in one exhaust systems. Merged headers are designed for racing purposes and have larger pipe work and a longer collector (the point where the 4 tubes merge) for increased power.

Headers are manufactured from cold rolled steel tubing with mandrel formed bends for maximum gas speed. All normaly headers include carburettor pre-heat pipe connections for single carbs, merged headers do not. Tip: Check that the pre-heat pipes are drilled out properly before fitting an aftermarket header/exhaust. You may need to drill these yourself.

We supply EMPI exhausts as both Combo systems and some individual parts. Bugpack exhaust system are supplied as individual parts only.

EMPI & Kadron Head Systems

These header systems are not interchangable with any other brands, so you will only be able to fit a matching silencer to the correct header.

Small Flange Headers

These use 1 3/8" diameter pipe work and a triangular flange.

Large Flange Headers

These use 1 1/2" pipe and a flange with curved sides. These offer slightly more power.

Merged Headers

These are available with 1 1/2", 1 5/8", and 1 3/4" piping and use small triangular flanges.

Aftermarket Type 3 Exhausts

SSP offer a huge range of aftermarket VW exhaust systems to suit any style of VW - from buggies and trikes to cal lookers and street cars. However, there are a large number of variables to consider when ordering a non-standard VW exhaust, including: ground and bodywork clearance, size, style, noise rating and coatings. In addition you will need to decide upon an appropriate 'header' - the pipework that connects your silencer to the exhaustt manifold. With so many options to consider we normally advise discussing your needs with the sales team at SSP before placing your order. You can email us, click on the ‘live chat’ button or call our sales team on 01273 444 000 at any time during UK business hours.