

Spread the cost or pay later
This accelerator pedal linkage upgrade kit from Buttys Bits for VW Splitscreen 60-67 left hand drive converts your throttle pedal from a worn vague on/off switch to a smooth progressive control and transforms the driveability of your bus.
This is a must have upgrade for your Splitscreen replacing the tired, worn and rusted original linkage system with a more positive feeling pedal linkage.
This product is intended for use as originally designed and should not be modified for alternative purposes. Please ensure it is installed by a qualified professional. Fitting instructions are typically not included with the product. Contacts
Also known as | AC721002 |
---|---|
Fitting Info | The kit consists of: A laser cut 5mm steel replacement pivoting linkage complete with sealed ball bearing swivel section Upgraded linkage from the pedal with bolted rose joints Rose jointed link rod return spring & mounting hardware When bolting the end of your throttle cable to the linkage, tighten then undo by a half turn to allow the cable to rotate freely. Use the supplied return spring if the kit is being used with a standard carburretor. Twin carburettors will have their own return springs which are stronger than stock springs. |
Marque | Volkswagen |
Vehicle | Type 2 Split |
Brand | Buttys Bits |
Quality | Top Quality |
Unit of sale | Kit |
Standard or Upgrade | Upgrade |
Weight | 1.00 |
Splitscreen | 1959-1967 |
---|