Beetle
Karmann Ghia
Type 2 Split
Type 2 Bay
Type 25
Transporter T5
Golf Mk1
Golf Mk2
911
996
997
986 Boxster
987 Boxster
912
944
924
Wheel Stud M14x1.5 45mm Press In: T2 Bay (1970-1979), T25/T3 (1980-1991)
SKU
AC601SS45
Wheel Stud M14x1.5 45mm Press In: T2 Bay (1970-1979), T25/T3 (1980-1991)
SKU
AC601SS45
Reviews & Ratings
Press in wheel stud. Supplied individually.
The total length of the stud is 53mm. The splined section is 15mm, then 30mm of thread and 8mm blank at the outer end.
Designed to be pressed into hubs with factory installed studs, to allow aftermarket alloy wheels and/or spacers to be safely fitted where the original studs would be too short.
It is important to measure and check the length of studs you'll need. Once installed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.
The total length of the stud is 53mm. The splined section is 15mm, then 30mm of thread and 8mm blank at the outer end.
Designed to be pressed into hubs with factory installed studs, to allow aftermarket alloy wheels and/or spacers to be safely fitted where the original studs would be too short.
It is important to measure and check the length of studs you'll need. Once installed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.
$6.25 $5.68
Klarna now available in checkout
Product Information
| Also known as | AC601SS45 |
|---|---|
| Fitting Info | The total length of the stud is 53mm. The splined section is 15mm 30mm of thread and 8mm blank at the outer end. |
| Marque | Volkswagen |
| Vehicle | Type 2 Bay, Type 25 |
| Thread Diameter | 14 |
| Thread Pitch | 1.5 |
| Thread length | 45 |
| Brand | Empi |
| Quality | Good Quality |
| Unit of sale | Each |
| Standard or Upgrade | Upgrade |
| Supplier code | 70-2810-0 |
| Front or Rear | Front, Rear |
| Weight | 1.00 |
Fits Vehicles
| T2 Bay | 1970-1979 |
|---|---|
| T25/T3 | 1980-1991 |
