M14x1.4 Screw in wheel stud with 28.5mm/9.5mm split; 38mm overall length.
Designed to screw into hubs that originally would have used wheel bolts in order to convert to a stud & nut setup. This makes it easier to locate your wheels on the hub, and allows a consistent choice of nuts to be used front and back. Perfect for use with alloy wheels and/or spacers.
It is important to measure and check the length of studs you'll need. Once screwed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.
This product is intended for use as originally designed and should not be modified for alternative purposes. Please ensure it is installed by a qualified professional. Fitting instructions are typically not included with the product. Contacts
Product Attributes
Also known as
AC601SS26
Fitting Info
Wind in to the disc/drum by hand or use a 7/32" Allen key.