Beetle
Karmann Ghia
Type 2 Split
Type 2 Bay
Type 25
Transporter T5
Golf Mk1
Golf Mk2
911
996
997
986 Boxster
987 Boxster
912
944
924
Wheel Nut M12x1.5 Radiused: Beetle (1960-1967), Karmann Ghia (1960-1967), Type 3 (1962-1966)
SKU
AC601SN41R
Wheel Nut M12x1.5 Radiused: Beetle (1960-1967), Karmann Ghia (1960-1967), Type 3 (1962-1966)
SKU
AC601SN41R
Reviews & Ratings
Wheel nut radius M12X1.5 open end
Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.
Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.
Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.
Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.
$3.75 $3.41
Product Information
This product is intended for use as originally designed and should not be modified for alternative purposes. Please ensure it is installed by a qualified professional. Fitting instructions are typically not included with the product. Contacts
| Also known as | AC601SN41R |
|---|---|
| Marque | Volkswagen |
| Vehicle | Beetle, Karmann Ghia, Beetle Cabriolet, Type 3 |
| Thread Diameter | 12 |
| Thread Pitch | 1.5 |
| Brand | Heritage Parts Centre |
| Quality | Good Quality |
| Unit of sale | Each |
| Standard or Upgrade | Upgrade |
| Front or Rear | Front, Rear |
| Weight | 1.00 |
Fits Vehicles
| Beetle | 1960-1967 |
|---|---|
| Karmann Ghia | 1960-1967 |
| Beetle Cabrio | 1960-1967 |
| Type 3 | 1962-1966 |