Deep Sump 1.5 Quart 1700-2000cc: T2 Bay (1972-1979), T25/T3 (1980-1983), 914 (1970-1976)
SKU
AC1150020
Deep Sump 1.5 Quart 1700-2000cc: T2 Bay (1972-1979), T25/T3 (1980-1983), 914 (1970-1976)
SKU
AC1150020
Reviews & Ratings
1.5 quart aluminium deep sump for use on performance Type 4 engines. The sump is supplied with the mounting hardware, pickup tube, T1 oil strainer and T1 sump plate. To suit vehicle fitted with a type 4 engine
$356.95 $324.50
Klarna now available in checkout
Product Information
Also known as | AC1150020 |
---|---|
Marque | Volkswagen, Porsche |
Vehicle | Type 2 Bay, Type 25, 914 |
Brand | Scat |
Quality | Top Quality |
Unit of sale | Each |
Weight | 1.00 |
Fits Vehicles
T2 Bay | 1972-1979 |
---|---|
T25/T3 | 1980-1983 |
914 | 1970-1976 |
Product Questions
I have recently purchased this kit for my 1981 T25 - 2000cc CU engine. I have fitted the pickup tube by pushing it on to the existing as far as it will go and doing up the clamp, fitted the sump with one of original screen gaskets and all looks good.
When I came to fit the new screen it will not go over the tube and therefore is about 8-10mm from its mating surface on the new sump.
Also there were no sealing rings for the cap screws that hold the bottom plate and screen on.
When I came to fit the new screen it will not go over the tube and therefore is about 8-10mm from its mating surface on the new sump.
Also there were no sealing rings for the cap screws that hold the bottom plate and screen on.
Question by: Gary Mckee on 18 Aug 2021, 5:32 am
Thanks for the enquiry. I had a chat with one of the product team and they did confirm the new strainer can be a tight fit, but should go over the extended pick up once pushed. If you can send some images of the problem to help@heritagepartscentre.com we will be able to look into the problem further.
Answer by: Nick Bitton on 18 Aug 2021, 3:56 pm