Beetle
Karmann Ghia
Type 2 Split
Type 2 Bay
Type 25
Transporter T5
Golf Mk1
Golf Mk2
911
996
997
986 Boxster
987 Boxster
912
944
924
Valve Adjuster Set Swivel Ball 8mm: Beetle (1960-1979), T2 Bay (1968-1979), Splitscreen (1960-1967)
SKU
AC109450
Valve Adjuster Set Swivel Ball 8mm: Beetle (1960-1979), T2 Bay (1968-1979), Splitscreen (1960-1967)
SKU
AC109450
Reviews & Ratings
Swivel ball style valve adjusters.
These adjusters eliminate valve tip wear caused by high lift camshafts and heavy duty valve springs. They feature oil feed holes which align with the gallery in the rocker arm. Supplied in sets of 8 with rocker shaft shims to correct valve geometry.
$91.95 $83.59
Product Information
This product is intended for use as originally designed and should not be modified for alternative purposes. Please ensure it is installed by a qualified professional. Fitting instructions are typically not included with the product. Contacts
| Also known as | AC109450 |
|---|---|
| Marque | Volkswagen |
| Vehicle | Beetle, Type 2 Split, Type 2 Bay, Karmann Ghia, Beetle Cabriolet, Type 3 |
| Brand | Scat |
| Quality | Good Quality |
| Unit of sale | 8 Piece Kit |
| Standard or Upgrade | Upgrade |
| Weight | 1.00 |
Fits Vehicles
| Beetle | 1960-1979 |
|---|---|
| T2 Bay | 1968-1979 |
| Splitscreen | 1960-1967 |
| Karmann Ghia | 1960-1974 |
| Beetle Cabrio | 1960-1979 |
| Type 3 | 1962-1973 |
Product Questions
Do the swivel type valve adjuster screws take the standard M8 x 1.0 nut?
And do the lock nuts come with the adjusters ?
Regards
And do the lock nuts come with the adjusters ?
Regards
Question by: Warren on 26 Feb 2025, 8:14 am
Afternoon,
Yes they do, but please note you may need to touch each of the rocker arms (ball side) against a grinding wheel to clearance them. Yes they come with shims but adding too many shims under a rocker stand may throw out the rocker arm geometry .
Yes they do, but please note you may need to touch each of the rocker arms (ball side) against a grinding wheel to clearance them. Yes they come with shims but adding too many shims under a rocker stand may throw out the rocker arm geometry .
Answer by: Max Morley (Admin) on 27 Feb 2025, 1:24 pm