Chrome plated wheel nut with an aluminium flat washer. 7/16" UNF thread, and designed to locate in a 3/4" hole in the wheel. For use on Wolfrace wheels. Each

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels

Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.