SIGN UP TO OUR NEWSLETTER

Accelerator Pedal Chassis Repair for Right Hand Drive: T2 Bay (1968-1972)

SKU
AC721013

Accelerator Pedal Chassis Repair for Right Hand Drive: T2 Bay (1968-1972)

SKU
AC721013
Reviews & Ratings

If you have a Right Hand Drive Early Bay you will possibly have a sloppy throttle rod that goes through your chassis, over the years people have possibly welded on washers to reduce the play. With this kit you can fit a new bearing onto your original rod, so do away with the play and give you zero slop.

Was £35.50 £29.58 Now £28.39 £23.66

Need help?

Contact us


Buy NOW, Pay LATER

Klarna now available in checkout


In Stock
Buttys Bits

Product Information

Product Attributes
Also known asAC721013
Fitting InfoWill fit RHD Baywindow from 68-721) Remove the roll pin that holds the end piece on2) Then the end piece should just pull off , this part may come straight off , or may need heat to remove it3) Once end piece is off clean the shaft up using some sandpaper\/wet and dry paper to clean off the corrosion, until the bearing slides over. (Slide bearing and holder up to the section thats worn4) Using the bearing holder mark through the 2 outer holes, then drill 2 holes and bolt the plate on5) Lubricate the shaft and fit the new end piece and secure in place with the supplied roll pin. Then remount the throttle kit
MarqueVolkswagen
VehicleT2 Bay
Weight (kg)0.12
BrandButtys Bits
QualityTop Quality
Unit of saleEach

Fits Vehicles

Product Vehicle Years
T2 Bay1968-1972

Product Questions

No questions yet. Be the first to ask the question!