CSP Front Disc Brake Conversion Kit with 5x205 Stud Pattern for 15''Wheel

SKU
AC698504
CSP

CSP Front Disc Brake Conversion Kit with 5x205 Stud Pattern for 15''Wheel

SKU
AC698504

CSP Front brake disc kit with a 5x205 stud pattern for models with 15 inch alloy wheels. (not steel wheels) This gives an 8mm increase in track width

CSP's top quality kits are TUV approved and allow you to convert either Link pin or Balljoint suspension to pre 1967 large 5 stud pattern 5x205 disc brakes. Brake kits are to convert link pin models to Porsche 5x130 stud are also sold by CSP. Each kit features steel brake discs fitted to CNC machined aluminium hubs with 14mm wheel studs along with the following parts. CNC caiper adaptor brackets (for drum brake axles), stainless steel dust covers, 48mm floating calipers, brake pads, brake hoses and all hardware to fit. Comprehensive fitting instructions are also included.

Link Pin models will require a dual circuit master cylinder
If using CB performance dropped spindles these have to be the type for drums
All kits are intended for use with 15 inch Beetle wheels or 15 inch alloy wheels. However there is a special version for bus owners for original 14 inch wheels.
Vented discs are available at an extra charge

More Info
Reviews & Ratings
Review this product
£1,149.95 £958.29
Out of stock

This product is a special order, and requires payment at the time of order. Special order items may have a longer lead time than other items

CSP Front brake disc kit with a 5x205 stud pattern for models with 15 inch alloy wheels. (not steel wheels) This gives an 8mm increase in track width

CSP's top quality kits are TUV approved and allow you to convert either Link pin or Balljoint suspension to pre 1967 large 5 stud pattern 5x205 disc brakes. Brake kits are to convert link pin models to Porsche 5x130 stud are also sold by CSP. Each kit features steel brake discs fitted to CNC machined aluminium hubs with 14mm wheel studs along with the following parts. CNC caiper adaptor brackets (for drum brake axles), stainless steel dust covers, 48mm floating calipers, brake pads, brake hoses and all hardware to fit. Comprehensive fitting instructions are also included.

Link Pin models will require a dual circuit master cylinder
If using CB performance dropped spindles these have to be the type for drums
All kits are intended for use with 15 inch Beetle wheels or 15 inch alloy wheels. However there is a special version for bus owners for original 14 inch wheels.
Vented discs are available at an extra charge

Product Information

Product Attributes
Part Disc Brake Kits
Fitting Info For pre '67 vehicle a dual circuit brake conversion is recommended. Part numbers for the conversion items are: AC698015 Dual Circuit Master Cylinder Conversion Kit 211-611-021\/AA Master Cylinder LHD T2 68-79 for servo
Brand CSP
Quality Top Quality

For Vehicles

Product Vehicle Years
Splitscreen 1955 - 1963