GAZ Front Suspension Coil Spring
AC413004Z
Gaz Coilover with a pin top and eyelet bottom for the front of the vehicle. The coilover has a maximum extended of 405mm and a maximum compressed length of 267mm. Each shock includes a knob to adjust the damping and rebound of the damper. Supplied as a pair but without springs
Can be used on the front of late Beetle models with a ball joint front beam but not 1302 or 1303
Gaz adjustable coilovers have all the benefits of GAZ shock absorbers above with the addition of a height adjustable spring set. They can be used to beef suspension up or raise cars that have been lowered too far when a complete tear town of the suspension is not desirable. The extended and collapsed lengths quoted do not include the bumpstop which is fitted. If this bump stop is left in place collapsed lengths will be 25mm longer. Springs for these shocks are supplied separately as the size depends on the application. When fitted to type 3 the adjustment knob can be tricky to get too.
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Klarna now available in checkout
This product is special order and will be ordered for you from the manufacturer. We require payment at the time of order. Special Order - delivery 5 weeks
Also known as | AC413104Z |
---|---|
Weight (kg) | 3.30 |
Brand | Gaz Shocks |
Quality | Good Quality |
Fitting Info | For the springs use part number AC413004Z " Important Fitting Notice ". " Please thoroughly clean and lightly lubricate the threads of the shock & adjusting collar prior to turning the collar. This will avoid galling thread damage and any dirty threads." |
Marque | Volkswagen |
Vehicle | Beetle |
Front or Rear | Front |
Unit of sale | Pair |
Beetle | 1965-1979 |
---|
AC413004Z