4 Inch Narrowed Beam

SKU
AC401038
Product of the UK

4 Inch Narrowed Beam

SKU
AC401038

4 Inch narrowed beam finished in satin black powdercoat. This will fit both left and right hand drive.

Each beam is produced from CDS (Cold Drawn Steel) Seamless tubing, then turned to length, each adjuster slot is then milled into the tubing along with the 4x grease points. Next to fit are the custom Xero adjusters in place which give over 6'' of adjustment travel. These adjusters are set in place in such a way as to achieve maximum drop and still give a great range of upper adjustment on nearly all configurations.

Next they are laser cut 8mm steel into beautifully designed end plates.

For the final step in the metal core assembly process, they are precision load the components into the robot welding cell, at this point fitted is the pre-fabriacted steering pin and stop assembly to the lower tube.

Now the core is built installed is a uniquely designed grease cavity / Delrin bushings system. This configuration allows the use of Delrin bushes which have great low wearing properties and will not damage your trailing arms over time, they also do not squeak like Urethane. Finally this also allows you to run factory grease seals keeping your grease in the beam, where it should be.

More Info
Reviews & Ratings
Review this product
£628.96 £524.13
Available for backorder

4 Inch narrowed beam finished in satin black powdercoat. This will fit both left and right hand drive.

Each beam is produced from CDS (Cold Drawn Steel) Seamless tubing, then turned to length, each adjuster slot is then milled into the tubing along with the 4x grease points. Next to fit are the custom Xero adjusters in place which give over 6'' of adjustment travel. These adjusters are set in place in such a way as to achieve maximum drop and still give a great range of upper adjustment on nearly all configurations.

Next they are laser cut 8mm steel into beautifully designed end plates.

For the final step in the metal core assembly process, they are precision load the components into the robot welding cell, at this point fitted is the pre-fabriacted steering pin and stop assembly to the lower tube.

Now the core is built installed is a uniquely designed grease cavity / Delrin bushings system. This configuration allows the use of Delrin bushes which have great low wearing properties and will not damage your trailing arms over time, they also do not squeak like Urethane. Finally this also allows you to run factory grease seals keeping your grease in the beam, where it should be.

Product Information

Product Attributes
Part Front Axle Beam
Brand United Kingdom
Quality Top Quality

For Vehicles

Product Vehicle Years
Splitscreen 1954 - 1967
Splitscreen USA 1954 - 1967