Distributor Complete 1.9 DG Waterboxer: T25 (1983-1992)
SKU
025-905-205/NEW
Distributor Complete 1.9 DG Waterboxer: T25 (1983-1992)
SKU
025-905-205/NEW
Reviews & Ratings
Distributor for 1.9 DG waterboxer engine. Complete with sender, rotor arm, distributor cap, single vacuum unit, shaft seal and oval connector plug on the side.
£149.95 £124.96
Klarna now available in checkout
Product Information
Also known as | 025905205NEW |
---|---|
Fitting Info | This unit has the earlier plug-type distributor cap for vehicles up to July '84. For later vehicles with the pin-type distributor cap either swap your old cap over or order a new cap: 027-905-207. |
Marque | Volkswagen |
Vehicle | T25 |
Weight (kg) | 0.832 |
Brand | SSP |
Quality | Good Quality |
Unit of sale | Each |
Standard or Upgrade | Standard |
Fits Vehicles
T25 | 1983-1992 |
---|
Product Questions
Will this distributor also fit a 1983 2.1 litre DJ Wasser Box engine?
Question by: JOHN BANNISTER on 3 Apr 2021, 10:06
Sorry, 1900cc DG only
Answer by: Nick Bitton on 3 Apr 2021, 11:13
Hello,
I have a 1983/4 VW T25 Caravelle Devon Camper fitted with a 1900 cc water cooled DG engine. It is still fitted with the original Bosch distributor marked 025 905 205C.The shaft bearings are worn thus causing side movement to the rotor arm. The Hall sender connection mounted on the distributor is oblong and measures approx. 16 mm x 8 mm with 3 terminals. Is your distributor the correct replacement including the connector. I do'nt want to change the existing wiring or plug.
Thanks/Regards/Ian Moorey.
I have a 1983/4 VW T25 Caravelle Devon Camper fitted with a 1900 cc water cooled DG engine. It is still fitted with the original Bosch distributor marked 025 905 205C.The shaft bearings are worn thus causing side movement to the rotor arm. The Hall sender connection mounted on the distributor is oblong and measures approx. 16 mm x 8 mm with 3 terminals. Is your distributor the correct replacement including the connector. I do'nt want to change the existing wiring or plug.
Thanks/Regards/Ian Moorey.
Question by: James Ian Moorey on 4 Mar 2020, 15:31
Yes, this should be a straight fit if you have a pre 1984 model. If you have a pin type cap, you will need to swap them over.
Answer by: Nick Bitton on 4 Mar 2020, 17:05